Call 08047645372 66% Response Rate

Send Email

Tile And Stone Adhesive

Leading Service Provider of ardex endura silver star adhesives, diamond star white c1t swimming pool tiling adhesive, ardex endura cl-11 commercial grade self leveling compound, flex grey flex tile adhesive, ardiflex s1 white coloured tile and stone adhesive and cps 20 id polyurethane based internal deck car park protection system from Pune.
Ardex Endura Silver Star Adhesives

Ardex Endura Silver Star Adhesives

Product Price: Rs 895 / BagGet Best Price

Minimum Order Quantity: 100 Bag

View Brochure

Product Details:
BrandARDEX ENDURA
Model NumberSilver Star
Packaging Size20 Kg
Packaging TypeBag
Surface Of ApplicationCONCRETE
FormPOWDER
Grade StandardIndustrial
StrengthMedium
Material CompatibilityCeramic
Chemical ResistanceWater
ColorGREY
AppearanceSMOOTH FINISHING
Coverageapprox. 1.45 - 1.55 kg/m2/mm
Open Time15 - 20 Minutes
VOC Content1.12 g/L
FeatureMoisture Resistant
Mixed Density1.80 - 1.85 g/cc
Bed Thicknessupto 6 mm
Pot Life3 hours
Setting Time24 Hours
Polymer modified grey cement-based adhesive, suitable for fixing ceramic tiles for floors & walls in interior situations. Suitable for fixing ceramic tiles upto 6 mm bed thickness (can be extended up to 12 mm thickness in area of limited extent). The set adhesive is water-resistant and is suitable for use in showers and bathrooms.FEATURES
  • Polymer modified adhesive
  • Good bond strength
  • Easy mixing & application
  • Water resistant
  • Enhanced flexibility & adhesion can be obtained with addition of ADMIX AD1 (latex additive)


Additional Information:

  • Delivery Time: AS PER REQUIREMENT
Get Best QuoteRequest A Callback
Diamond Star White C1t Swimming Pool Tiling Adhesive

Diamond Star White C1t Swimming Pool Tiling Adhesive

Product Price: Rs 790 / BagGet Best Price

Minimum Order Quantity: 100 Bag

View Brochure

Product Details:
BrandARDEX ENDURA
Model NumberDiamond Star White
Packaging Size20 Kg
Packaging TypeBag
Surface Of ApplicationCONCRETE
FormPOWDER
Grade StandardIndustrial
Thicknessupto 6 mm
Open Time15 - 20 Minutes
Pot Life3 hours
Setting Time24 hours
White cement based, high polymer modified, high strength adhesive for fixing light colored natural stones, glass mosaic on wall/floor in interior/exterior situations up to 6mm bed thickness (can be averaged up to 12mm in final bed thickness). DIAMOND STAR White is deformable and can accommodate shocks due to impact load and heavy traffic. The set adhesive is water-resistant and non-slip.
FEATURES

• Very high bond strength
• Non-slip
• Deformable to accommodate minor shocks
• Water resistant
• Easy mixing, smooth application & better workability
• Enhanced flexibility & adhesion can be obtained with addition of ADMIX AD1 (latex additive)



Additional Information:

  • Delivery Time: AS PER REQUIREMENT
  • Packaging Details: DIAMOND STAR White C1T Swimming Pool Tiling Adhesive
Get Best QuoteRequest A Callback
Ardex Endura Cl-11 Commercial Grade Self Leveling Compound

Ardex Endura Cl-11 Commercial Grade Self Leveling Compound

Product Price: Rs 1,150 / BagGet Best Price

Minimum Order Quantity: 100 Bag

View Brochure

Product Details:
Provide Services InCorporate Building
BrandARDEX ENDURA
Model NumberCL-11
Flooring TypeVinyl/Bamboo
Packaging Size25 KG
Packaging TypeBag
Usage/ApplicationIndoor
Available Flooring TypeCementicious self levelling
FormPOWDER
Grade StandardReagent Grade
Coverageapprox. 5 m2 at 3 mm thick
VOC Content7.1 g/L
Compressive Strength20 N/mm2
Scratch Hardness1.6 mm
Ball Impact Hardness6.5 mm
Flexural Strength After a Day1.5 N/mm2
Flexural Strength After 7 Day3.5 N/mm2
Bulk Density1.3 kg/l
Pot Life15 min
Weight of Fresh Mortar2.0 kg/l
Working Time25 minutes
Initial Set40 minutes
Final Set1 hour
Description
  • CL 11 has been especially designed to produce a smooth, flat surface when applied to hard, rigid sub-floors such as cement sand screeds, concrete, etc. CL 11 contains high quality special cements and selected fillers so that, when mixed with water, it produces a free-flowing mortar with self-levelling properties. The mortar can be applied at a thickness from 3 - 5mm and suitable for internal areas only.
Uses
  • Levelling and smoothing uneven internal sub-floors such as concrete, cement sand screed, quarry tiles, etc. prior to the installation of carpets, ceramic tiles, vinyl or parquet flooring. Not suitable for exposed wearing surfaces.
Features
  • Pumpable: highly fluid for fast installation 
  • Self-smoothing: produces flat and absorbent surface for subsequent finishes
  •  Walkable after 3 hours
  •  Ready to receive floor coverings within 48 hours  
  • Priming
  • Porous or absorbent substrates (concrete or cement sand screeds): Use P 51 primer to seal the pores and prevent air bubbles from rising through the applied mortar. The primer also helps to maintain flow life and promote excellent adhesion to the substrate.
  • Nonporous or non-absorbent substrates (quarry tiles, mosaic): Use P 7 primer to ensure adequate adhesion of the subsequently applied CL 11. 
Mixing
  • In a clean mixing vessel, take 5.0 - 5.5 litres of cool, clean water (additional 0.5 ltrs of water may be required if the ambient o temperature is above 30 C or RH is >75). Add 25 kg of CL 11 powder to the mixing vessel and mix steadily and thoroughly until a slump-free fluid consistency is obtained. The use of mixing paddle with a 10mm chuck, ensures thorough mixing with maximum sheer yet minimum air entrapment and heat built up. After approximately two minutes mixing, scrape down the sides and around the bottom of the bucket to ensure no deposits of dry powder. Continue mixing for another minute until an even consistency is achieved. For improved efficiency and continuous production, it is recommended to use at least two mixing buckets. For larger jobs, the use of a mechanical mixer/pump unit is recommended.
Application
  • Pour the mixed CL 11 onto the primed substrate and using a steel finishing trowel or float spread the material well within its working time. Roll the surface using a spiked roller to release all entrapped air. 
Drying and Hardening
  • Allow the CL 11 to be air-cured. The surface will be walkable after 3 hours and ready to receive floor coverings after 48 hours (and within 7 days) at 27±1°C. 
Cleaning
  • CL 11 can be removed from tools and equipment by washing in clean water immediately after use. Any hardened material will need to be removed mechanically
Storage and Shelf Life
  • CL 11 should be stored under the same conditions as cement; store CL 11 in cool, dry, shaded warehouses. CL 11 should not be stored in direct contact with the floor. When stored under the correct conditions CL 11 will have a shelf life of 9 months
Precautions
  • CL 11 contains more than 20% cement and, therefore, in line with current legislation, is classified as irritating to eyes and skin. For this reason, the following precautions should be observed. Avoid contact with skin and eyes; in case of contact with the eyes, rinse immediately with plenty of water and seek medical advice; wear suitable gloves and keep the product out of the reach of children. Avoid generation of airborne dust during mixing. 


Additional Information:

  • Delivery Time: AS PER REQUIREMENT
  • Packaging Details: 25 KG BAG
Get Best QuoteRequest A Callback
Flex Grey Flex Tile Adhesive

Flex Grey Flex Tile Adhesive

Get Latest Price

View Brochure

Product Details:
BrandARDEX ENDURA
Model NumberFlex Grey
Open Time20 to 25 minutes
VOC Content4.24 g/l
Mixed density1.28 g/cc
Bed Thickness2 - 10 mm
Liquid: Powder ratio1 : 2.42
Adjustability20 to 25 minutes
Setting time24 hours
Two-part adhesive comprising of rubber-based powder and water based polymer liquid. Flexible adhesive for use in areas where tiling is likely to be subjected to some limited background movement or vibration, especially wood, plywood & metal surface. Available in grey and white. PERFORMANCE Suitable for fixing at 2 - 10mm bed thickness wall and floor tiles, glass mosaics, vitrified tiles and natural/engineered stones in interior and exterior installations, including swimming pools. Also suitable for use on floors subjected to light traffic conditions, but bed thickness must not to exceed 10mm. No traffic should be allowed on the floor for at least 24 hours after completion of tiling. With dense or impervious surfaces, drying-out and setting time of the adhesive may be delayed.
Get Best QuoteRequest A Callback
Ardiflex S1 White Coloured Tile And Stone Adhesive

Ardiflex S1 White Coloured Tile And Stone Adhesive

Get Latest Price

View Brochure

Product Details:
BrandARDEX ENDURA
Model NumberARDIFLEX S1
Packaging Size50 Kg
Packaging TypeBag
Thickness2-15 mm (Bed)
Open Time30 - 35 Minutes
VOC Content3.78 g/L
Shelf Life12 months
Usage/ApplicationFixing large format tiles,Slim tiles and stable natural stones on wall/floor in interior/exterior
Coverage AreaApproximately 1.2 kg/m2/mm
TypePolymer modified adhesive
Mixing Ratio1 p.b.w Water to 4 p.b.w powder
Pot LifeApprox 3 hours
Temperature Resistance-30 deg C to +150 deg C
Tensile Adhesion StrengthGreater than 1 kN
Shear Adhesion5 kN (1 Day Air),17 kN (14 Days Air )
Mixed Density1.30-1.40 g/cc
Adjustability25 to 30 minutes
Ready For GroutingApprox. 10 hours (Walls),Approx 24 hours (Floor)
Pack TypePP Bag
ArdiFlex S1 (White) is fibre reinforced to increase the flexural and bond strength of the adhesive and to impede the crack propagation in the composite material.

Features:
  • Fibre reinforced for high performance and strength
  • Deformable: accommodates differential movement of the covering
  • Good slip resistance required for fixing large format wall tiles
  • Extended open time
  • Bed thickness upto 15mm: suitable for tiling on uneven substrates
  • Excellent bond to various building materials
  • Excellent water and frost resistance
  • Excellent tensile & shear adhesion
  • Easy mixing, smooth application & good workability
  • Confirms to EN 12004 : 2017 of class C2TES1
  • Complies with the requirements of IS 15477 : 2004 Type 2
Get Best QuoteRequest A Callback
CPS 20 ID Polyurethane Based Internal Deck Car Park Protection System

CPS 20 ID Polyurethane Based Internal Deck Car Park Protection System

Get Latest Price

View Brochure

Product Details:
BrandARDEX ENDURA
Model NumberCPS 20 ID
Packaging Size20 Kg
Surface Of ApplicationInternal Car Park decks and ramps, Service centers, garages, Warehouses,Loading Bays
Chemical TypePolyurethane based
Coverage0.4 kg/m2 (Base Coat),0.6-1.0 kg/m2 (Slip Resistance),0.4 kg/m2 (Wear coat) (Driveways & parking)
Compressive StrengthGreater than 8 N/mm2 (1 day),13 N/mm2 (3 days),20 N/mm2 (7 days)
Tensile StrengthGreater than 7 N/mm2 (at 7 days)
Water Absorption0.05%
CPS 20 ID is a tough, durable, polyurethane car pack protection system providing a seamless, wear resistant, profiled surface to intermediate decks of multi-story car parks. CPS 20 ID is available in various colours, providing aesthetics and demarcation of different areas.

Features:
  • Seamless
  • Anti skid
  • Hard wearing: extremely durable and abrasion resistant with low maintenance cost
  • Resistant to a general and vehicle related chemicals spillages
  • Supplied in pre-measured packs for ease of mixing and consistency at site
  • Aesthetically attractive
Get Best QuoteRequest A Callback
Ardex Endura PLATINUM STAR White Rigid Plywood And Metal Surfaces Fixing Tiles Adhesive

Ardex Endura PLATINUM STAR White Rigid Plywood And Metal Surfaces Fixing Tiles Adhesive

Get Latest Price

View Brochure

Product Details:
BrandARDEX ENDURA
Model NumberPLATINUM STAR White
Packaging Size50 Kg
Packaging TypeBag
Chemical TypeWhite cement based adhesive
ThicknessUpto 6 mm (Bed)
CoverageApproximately 2.75 kg/m2 using a 6mm x 6mm square notch trowel
Open Time20 - 25 Minutes
VOC Content3.78 g/L
Shelf Life12 months
Usage/ApplicationFixing tile and stone on wall/floor in interior/exterior
Mixing Ratio1 p.b.w. Water to 4 p.b.w. Adhesive
Pot Life3 hours
Setting Time24 hours
Temperature Resistance-30 deg C to 150 deg C
Tensile Adhesion StrengthGreater than 1.0 N/mm2
Mixed Density1.35 - 1.40 g/cc
Shear Adhesion8.00 kN (1 Day Air),16.00 kN (14 Days Air )
Pack TypePP Bag
Premium quality, high polymer modified deformable adhesive

White cement based, water & frost resistant, high polymer modified, high strength adhesive. The set adhesive is water-resistant and suitable for use in swimming pools.

Features:
  • Very high performance and strength
  • Flexible adhesive
  • Premium multi use adhesive
  • Excellent water and frost resistance
  • Excellent tensile & shear adhesion
  • Easy mixing, smooth application & better workability
  • Complies with the requirement of IS 15477: 2004 Type 2
  • Complies with the requirement of EN 12004 : 2007 C2ES1

Substrate Preparation
  • Before starting any work ensure that the base is:
  • Sufficiently flat to permit the specified flatness of finished tiling, bearing in mind the permissible thickness of the adhesive. 
  • Suitable for tiling in the service conditions to which it will be exposed.
  • Surfaces to be tiled must be dry, clean and free from loose material and contamination.

Surface Consideration:

New Concrete/Brick/Block Wall:
  • Before rendering/plastering/tiling, allow walls to air dry for at least 6 weeks.

New Cement/Sand rendering:
  • Before commencing tiling, allow plastered surface to air dry for at least 2 weeks (3 weeks for swimming pools).

New Concrete Bases:
  • Before commencing tiling, ensure that bases have been allowed to air dry for at least 4 weeks

Existing Concrete/Screed Bases
  • Cut out all loose or hollow portions and make good with a 1:3 cement:sand mortar applied over a slurry bonding coat* and dry and cure for 7 days.

Ceramic/Vitrified & Fully Vitrified Tile/Terrazzo/Hard Natural Stone Bases:
  • Check that existing finish is firmly adhering to the base. Remove any loose or hollow sounding tiles and reprofile with a 1:3cement:sand mortar over a slurry bonding coat*. Any surface contamination should be removed with HEAVY DUTY TILE CLEANER/TILE & STONE CLEANER.

Overlaid Timber Floors/Metal Boards:
  • Timber floor/Metal boards must be rigid and stable to receive tiles and capable of carrying the additional load without deflection. Adequate ventilation must exist beneath the timber/metal board. Overlay existing floor with WBP grade or marine grade plywood, at least 15 mm thick, timber/metal boards should be screwed down (not nailed) at 300 mm centres. All timber surfaces should be primed on the reverse side and edges with ADMIX AD 1. 

Fibre Cement Boards/Tile Backer Boards:Ensure that boards are dry, securely fixed, rigid and fixings do not protrude. Do not seal or prime surfaces that are to be tiled. The suitability of the boards as a background for ceramic tiling should be confirmed with the manufacturer.
MDF (Internal Dry Areas Only) /Plywood/Chip Board:Ensure that sheets are capable of carrying the expected load without deflection; dry securely fixed and rigid and that fixings do not protrude. Where necessary insert noggings to support all board edges and to allow screw fixing at 300 mm centres. Seal the reverse side and edges with ADMIX AD 1. Do not seal or prime surfaces that are to be tiled.
Get Best QuoteRequest A Callback
Ardex Endura Platinum Star Tile Adhesives

Ardex Endura Platinum Star Tile Adhesives

Get Latest Price

Product Details:
BrandARDEX ENDURA
Packaging Size20 Kg
Packaging TypeBag
Surface Of ApplicationCONCRETE
FormPOWDER
Grade StandardIndustrial
StrengthHigh

White cement based, water & frost resistant, high polymer modified, high strength adhesive for fixing tile and stone on wall/floor in interior/exterior situations upto 6mm bed thickness (can be extended up to 12 mm in area of limited extent). The set adhesive is water-resistant and suitable for use in swimming pools.

PLATINUM STAR is used for fixing ceramic, vitrified & fully vitrified tiles, glass mosaic, porcelain, terrazzo, metal or glass tiles, non staining natural stone and engineered stone.

FEATURES

 

• Very high performance and strength
• Flexible adhesive
• Premium multi use adhesive
• Excellent water and frost resistance
• Excellent tensile & shear adhesion
• Easy mixing, smooth application & better workability
• Complies with the requirement of IS 15477: 2004 Type 2
• Complies with the requirement of EN 12004 : 2007 C2ES1



Additional Information:

  • Delivery Time: AS PER REQUIREMENT
Get Best QuoteRequest A Callback
Ardex Endura Admix Adhesives

Ardex Endura Admix Adhesives

Get Latest Price

Product Details:
Minimum Order Quantity100 Bag
BrandARDEX ENDURA
Model NumberK 301
Packaging Size25 KG
Packaging TypeBag
Surface Of ApplicationCONCRETE
FormPOWDER
Grade StandardIndustrial
Chemical TypeCEMENTITIOUS
Chemical ResistanceWater
Thickness2-20 MM
ColorGREY
AppearanceSMOOTH
Coverage3.0 sqm for 5 mm thickness
Curing Timeafter 48 hours

K 301

Fast Setting Resurfacing and Levelling Compound

DESCRIPTION

K 301 is a fast setting cement-based product designed to smooth, level, rough and damaged concrete surface in external and internal situations. K 301 is a grey powder consisting of special cements, graded aggregates and high quality synthetic resins

FEATURES

• Suitable for internal and external applications
• For smoothing and resurfacing paths, drives, parking areas, courtyards, etc.
• Cost effective solution for smoothing rough or impact damaged concrete
• Fast setting-walkable after 2 – 3 hours
• Rapid hardening-can withstand light vehicular traffic after 48 hours
• Easy to mix and apply – pumpable
• For thicknesses from 2 – 20 mm in a single application
• Can be used with suitable resin coatings

Get Best QuoteRequest A Callback
Ardex Endura Admix Ad1

Ardex Endura Admix Ad1

Get Latest Price

View Brochure

ADMIX AD 1 is a white, polymer emulsion for use with cement mortar or cement based adhesives to improve the flexibility, water resistance and bond strength.ADMIX AD 1 is specifically recommended for use with GOLD STAR/WHITE STAR while tiling in swimming pools and water retaining structures.
FEATURES

• Polymer additive for use with cement based adhesives to enhance the properties and performance.
• Improves flexibility
• Improves water resistance
• Increases adhesion
• Suitable for submerged conditions

• Suitable for Interior & Exterior 
Get Best QuoteRequest A Callback
Ardex Endura White Star Tile Adhesive

Ardex Endura White Star Tile Adhesive

Get Latest Price

View Brochure

Product Details:
Minimum Order Quantity100 Bag
BrandARDEX ENDURA
Packaging Size20 Kg
Packaging TypeBag
Surface Of ApplicationCONCRETE
FormPOWDER
Grade StandardIndustrial
High polymer modified, white cement-based tile adhesive suitable for fixing tiles with less than 3% porosity, like vitrified, semi-vitrified tiles and natural stones on walls and floor in interior and exterior situations. WHITE STAR is specially designed to fix marble tiles/stones to prevent discoloration/stains due to iron-oxide. The set adhesive is water-resistant and is suitable for use in showers, wet areas and swimming pools. Also, ideal for renovation (tile-over-tile) for quick & easy installation works.FEATURES

• High bond strength
• Easy mixing, smooth application & better workability
• Suitable for most common substrates and tiles
• Water resistant
• Enhanced flexibility & adhesion can be obtained with addition of ADMIX AD1 (latex additive).



Additional Information:

  • Delivery Time: AS PER REQUIREMENT
Get Best QuoteRequest A Callback
Ardex Endura Wpm-265 Shelter Coat Water Based Primer

Ardex Endura Wpm-265 Shelter Coat Water Based Primer

Get Latest Price

View Brochure

Product Details:
BrandARDEX ENDURA
Model NumberWPM 265
Packaging Size5 Litre
Packaging TypeCAN
FormLiquid
AppearanceWhite/pink coloured liquid
CoverageApprox. 6 m2/litre
VOC Content11 g/L
Shelf Life12 Months
TypeWater Based
Dry TimeApprox. 2 hours
Storage Temp5 Deg C and 30 deg C
Bond strength> 1.5 N/mm2
Product Description
  • WPM 265 is an acrylic primer system which creates a positive bond between the substrate and most water based coatings. WPM 265 can be used in internal as well as external applications.
Uses
  • As a primer for acrylic coatings in areas such as
  • Internal Wet Areas Ÿ Balconies and Decks
  • Swimming Pools
  • Drywalls
  • Other waterproofing areas that will be tiled or otherwise protected from regular foot traffic.

Features
  • Creates a positive bond between the substrate and most water based coatings
  • Can be used on various substrates
  • Can be used for interior and external situations. 
Suitable Substrates: 
New and old concrete.
  • Timber.
  • Compressed fibreboards.
Application Instructions  
Substrate preparation
  • The surface to be treated must be dry, clean, structurally sound, free from oil, grease, wax, polish, laitance, dust and other barrier materials. New substrate shall be allowed to cure as per standard procedure
  • All cracks, construction joints, pipe penetration, bore packing and corners shall be treated prior to application of waterproofing membrane.
Do’s & Don’ts of WPM 265
  • Do not apply WPM 265 if the temperature is below 10°C or above 35°C. Ÿ Primed surfaces should preferably be overcoated within the same day of application to avoid intercoat contamination.
Cleaning 
  • Wash hands, brushes, rollers, etc with water while the material is still fresh. Remove cured material mechanically.
Storage and Shelf Life 
  • WPM 265 has a shelf life of 12 months if kept in a dry, clean store between 5ºC and 30ºC in the original unopened containers. The product should be protected from frost, away from direct sunlight and sources of heat
Safety Precautions 
  • WPM 265 is non-toxic. Avoid contact with skin and inhalation of the vapour. Wear protective eye/face protection and gloves when handling. Provide adequate ventilation. Wash off splashes with clean water. If irritation persists, seek medical advice.
Disclaimer 
  • The technical details, recommendations and other information contained in this data sheet are given in good faith and represent the best of our knowledge and experience at the time of printing. It is your responsibility to ensure that our products are used and handled correctly and in accordance with any applicable Indian Standard, our instructions and recommendations and only for the uses they are intended. We also reserve the right to update information without prior notice to you to reflect our ongoing research and development program. Country specific recommendations, depending on local standards, codes of practice, building regulations or industry guidelines, may effect specific installation recommendations. The supply of our products and services is also subject to certain terms, warranties and exclusions, which may have already been disclosed to you in prior dealings or are otherwise available to you on request. You should make yourself familiar with them.
Get Best QuoteRequest A Callback
Ardex Endura Vitrified Tile Adhesive Grey

Ardex Endura Vitrified Tile Adhesive Grey

Get Latest Price

View Brochure

Product Details:
BrandARDEX ENDURA
Model NumberDiamond Star
Packaging Size20 Kg
Packaging TypeBag
FormPOWDER
Open Time15 - 20 Minutes
TypeVitrified
Mixed Density1.50 - 1.55 g/cc
Bed Thicknessupto 6 mm
Mixing Ratio1 p.b.w. Water to 4 p.b.w. Adhesive
Pot Life3 Hours
Setting Time24 hours
DESCRIPTION

Grey cement based, high performance, high strength adhesive for fixing tiles/stones in areas of limited movement or vibration as it can accommodate shocks due to impact load and heavy traffic. The set adhesive is water-resistant and non-slip.

DIAMOND STAR Grey is ideal for fixing ceramic, vitrified & fully vitrified tiles, glass mosaic, porcelain, industrial grade tiles, cement terrazzo, natural stone and engineered stone on wall/floor in interior/exterior situations upto 6mm bed thickness (can be extended up to 12 mm in area of limited extent).

FEATURES

• Very high bond strength
• Non-slip
• Deformable to accommodate minor shocks
• Water resistant
• Easy mixing, smooth application & better workability
• Enhanced flexibility & adhesion can be obtained with addition of ADMIX AD1 (latex additive)

Get Best QuoteRequest A Callback
CPS 10 E Epoxy Based Internal Deck Car Park Protection System
  • CPS 10 E Epoxy Based Internal Deck Car Park Protection System
  • CPS 10 E Epoxy Based Internal Deck Car Park Protection System

CPS 10 E Epoxy Based Internal Deck Car Park Protection System

Get Latest Price

View Brochure

Product Details:
BrandARDEX ENDURA
Usage/ApplicationInternal Car Park decks and ramps, Service centers, garages, Warehouses,Loading Bays
ColorAvailable in range of colours
No. Of ComponentsTwo Component
Packaging Typeset
FinishHigh Gloss
Paint Base TypeEpoxy based
Coverage Area0.35 kg/m2 (Base Coat),0.6 kg/m2 (Slip Resistance),0.35 kg/m2 (Wear coat) (Driveways & parking)
Pot Life30 minutes
Full Cure7 days
Model NameCPS 10 E
Walkability24 hours
Vehicular Traffic5 days
Bond StrengthGreater than 1.5 MPa
CPS 10 E is a tough, durable, epoxy based car park protection system providing a seamless, wear resistant, profiled surface to intermediate decks of multi-story car parks. The high gloss helps to brighten the car park and provides aesthetical finish by demarcation of different areas.
Features
  • Seamless: easily cleanable to maintain high standards of hygiene
  • Tough & Hard wearing: durable with low maintenance cost
  • Resistant to a wide range of chemicals and liquids
  • Provides a high gloss finish
  • Anti skid
  • Supplied in pre-measured packs for ease of mixing and consistency at site
  • Aesthetically attractive
Get Best QuoteRequest A Callback
Non Acidic Tile And Stone Cleaner

Non Acidic Tile And Stone Cleaner

Get Latest Price

View Brochure

Product Details:
Packaging Size500 ml
Fragrancena
BrandArdex Endura
Type Of FloorOperation theatres - Walls - Floors - Kitchens - Bathrooms - Countertops
Packaging TypeBottle
ColorWhite
FormLiquid
Shelf Life24 months in original unopened container
Model Name/NumberNON ACIDIC CLEANER
Storage ConditionStore in dry conditions between 5 DegreeC and 30 DegreeC
Fast acting, non-acidic, concentrated, wall and floor tile / stone cleaner. The special formulation removes dirt, grease and stains from tiled surfaces. When dry, the surface is left hygienically clean. USES NON ACIDIC CLEANER can be used in interior situations such as:
• Operation theatres
• Walls
• Floors
• Kitchens
• Bathrooms
• Countertops
FEATURES
• Non-acidic
• Fast acting
• Anti-bacterial
• Provides hygienically clean surroundings
• Shield against
MICROBE
• Easy to use
Get Best QuoteRequest A Callback
Heavy Duty Impregnating Tile & Stone Sealer

Heavy Duty Impregnating Tile & Stone Sealer

Get Latest Price

View Brochure

Product Details:
Model NumberHeavy Duty Impregnating Tile & Stone Sealer
Packaging Size1 litre
Packaging TypeTin Can
FormLiquid
Shelf Life24 Month
CoverageApprox. 5 - 15m2/litre/coat depending on porosity
Storage ConditionStore in dry conditions between 5 DegreeC and 30 DegreeC
DESCRIPTION HEAVY DUTY IMPREGNATING TILE & STONE SEALER is a solvent based deep penetrating sealer designed for use on marble, lime stone, granite, slate, terrazzo and other natural stone to reduce the water permeability of the surface. It reduces stains, seals with a wet look finish enhancing the colour of the stones and provides a breathable surface.
FEATURES
  •  Seals with a wet look finish
  •  Stain resistant
  •  Non-yellowing
  •  Improves wear resistant of surface 
  •   Reduces water permeability
  •  Enhances the colour of the stone
  •  Suitable for both exterior and interior applications
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "Tile And Stone Adhesive"?
Thank youYour Enquiry has been sent successfully.

Reviews & Rating

3.3/5

★★★★★★★★★★

Reviewed by 4 Users

  • 5★2
  • 4★0
  • 3★0
  • 2★1
  • 1★1
  • User Satisfaction
  • Response100%

Most Relevant Reviews

N
★★★★★★★★★★
31-May-21
Narawade
Pune, Maharashtra
Product Name : Residential Flats
Response
N
★★★★★★★★★★
08-August-18
Nayan Karnik
Mumbai, Maharashtra
S
★★★★★★★★★★
06-April-18
Stalin
Imphal, Manipur

© Innovative Polycoats Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.