Call 08047645372 66% Response Rate

Send Email

Ardex Floor Coating

Leading Service Provider of ardex endura r 21 ce, ardex endura r 2 ce solvent free epoxy primer, ardex endura a37 screed cement, ardex endura r 24 ce epoxy screed and ardex endura r 70 cp medium duty polyurethane screed from Pune.
Ardex Endura R 21 CE

Ardex Endura R 21 CE

Product Price: Rs 3,800 / KgGet Best Price

View Brochure

Product Details:
Packaging Size18.5 kgs
BrandARDEX ENDURA
Usage/ApplicationFloors
Grade StandardIndustrial Grade
ColorAvailable in range of colours
Packaging Typeset
FormLiquid and powder
CoverageCoverage (approx.) for 0.5 mm 21 m2 and for 1mm 11.5 m2
Shelf Life12 months
FinishHigh Gloss
Paint Base TypeSolvent Based
Application MethodTrowler
Pot Life35 minutes
Full Cure7 days
Initial hardness24 hours
DESCRIPTION

R 21 CE is a high gloss, self-smoothing, epoxy resin floor finish applied between 0.5 – 1.0 mm thickness. It combines outstanding wearing properties with chemical resistance and decorative finish. Ideally suited in situations where a seamless, joint free finish is required and maximum cleanliness is essential.

COLOURS

Available in any standard RAL colour

FEATURES

• Seamless: easily cleanable to maintain high standards of hygiene
• Tough & Hard wearing: durable with low maintenance cost
• Resistant to a wide range of chemicals and liquids
• Self-smoothing: provides a flat high gloss finish
• Suitable for use as topping on existing epoxy screed
• Food grade: CFTRI approved; confirms to the specifications as per U.S FDA 175.300
• Supplied in pre-measured packs for 0.5 mm and 1 mm thickness requirements

Get Best QuoteRequest A Callback
ARDEX ENDURA R 2 CE Solvent Free Epoxy Primer

ARDEX ENDURA R 2 CE Solvent Free Epoxy Primer

Product Price: Rs 4,600 / KitGet Best Price

View Brochure

Product Details:
BrandArdex Endura
Packaging Size5 kg (Part A 3.30 kg and Part B 1.70 kg),10 kg (Part A 6.60 kg and Part B 3.40 kg)
Pack TypeBucket
FormLiquid
Grade StandardIndustrial
Surface of ApplicationConcrete
FeaturesSolvent free
Chemical TypeSolvent free
CoverageApproximately 5.0 m2/kg/coat
Shelf LifeNot less than 12 months
Coats RequiredMinimum 2 coats
Pot Life60 minutes
Model Name/NumberR 2 CE
Application Temperature10 deg C to 35 deg C
Walkability24 hours
Full Cure Time7 days
Bond StrengthGreater than 2.5 N/mm2
Recoat TimeOver night
Product DescriptionR 2 CE is a solvent free, low viscosity, two component epoxy primer. It is designed to seal the porosity of the substrate before installing resin based coating, self level topping and screed.

Features:
  • As a primer for use with epoxy based flooring systems
  • Seals the substrate porosity
  • Allows the subsequent coating to achieve a correct dry film thickness
  • Low viscosity: penetrates into the concrete substrate for a better bond
  • Long pot life
  • Supplied in pre-measured packs for ease of mixing and consistency at site

Substrate Preparation
The concrete or screed substrate must be hard, sound and free of dust and other barrier materials such as paint, curing agents, laitance, etc., which will inhibit adhesion to the substrate. Use degreaser to remove polish, wax, grease, oil and similar contaminating substances prior to mechanical preparation. Contaminated concrete surfaces should be mechanically prepared, either by scabbling, grinding or contained shot blasting equipment or similar, and be vacuumed clean prior to applying R 2 CE. Overwatered or otherwise weak concrete surfaces must also be suitably prepared down to sound, solid concrete by mechanical methods. Dust and other debris should be removed using vacuum equipment. 

Mixing
The individual contents of the R 2 CE should be thoroughly stirred before being mixed together. The entire contents Part B should be poured into Part A and the two materials mixed thoroughly for at least 3 minutes using a heavy duty slow speed drill and spiral paddle. Some of the mixed components should be reintroduced back into the hardener container in order to activate any residue and then poured back into the larger mixing vessel and re-mixed for 30 seconds. Mixing in this way will ensure product consistency and that any resin that remains in the containers after application will cure to provide for easier waste disposal. 

Application
Once mixed, the material should be spread over the floor as self-heating in the container will reduce working time. Apply using a brush or short/medium pile roller. Two or more coats may be needed to ensure that a uniform coating is achieved and to compensate for differences in surface porosity. 

R 2 CE should be allowed to dry prior to the installation of the final floor finish, typically 24 hours.

Cleaning
R 2 CE can be removed from tools and equipment by using RTC 100 immediately after use. Any hardened material will need to be removed mechanically.

Precautions
During mixing and application the following precautions should be observed: Ensure adequate ventilation and avoid contact of the material with the eyes, nasal passages, mouth and unprotected skin. Avoid contact with the hands by wearing protective gloves and by using, if necessary, a suitable barrier cream. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of splashes on the skin, wash immediately with plenty of soap and water. Prolonged contact with the skin should be avoided, especially where the user has an allergic reaction to resin-based materials. Always wear gloves and eye/face protection as necessary. Observe personal hygiene, particularly washing the hands after work has been completed or at any interruption whilst work is in progress. Care should be taken when removing gloves to avoid contaminating the insides. In case of accidents seek medical advice.

Disposal/Spillage 
Spillage of any of the product components should be absorbed onto sand or other inert materials and transferred to a suitable disposable vessel. Disposal of such spillage or empty packaging should be in accordance with local waste disposal authority regulations.
Get Best QuoteRequest A Callback
Ardex Endura A37 Screed Cement

Ardex Endura A37 Screed Cement

Get Latest Price

View Brochure

Product Details:
Minimum Order Quantity100 Bag
BrandArdex Endura
Usage/ApplicationAirport Terminals, Public spaces, Shopping Malls, Universities, Tiles & natural stones
Packaging Size25 kgs
Typepolymer base
Coverage Area4.0 m2 (1 5 ratio),4.5 m2 (1 6 ratio),5.5 m2 (1 8 ratio) (all @ 20 mm thickness)
Thickness15 mm - 50 mm (Bonded screeds),50 mm+ (Unbonded screeds),75mm+ or 65mm+ (Floating screeds)
StandardDIN 18560 and EN 13813
Shelf Life12 month shelf life

Pre-bagged, proprietary screed cement

DESCRIPTION

A 37 is a blend of cement, fillers, high quality additives and superior polymer to produce a rapid usable screed for receiving floor coverings such as tiles/stones/cementitious self levelling compounds/resin coatings/textile floor coverings/parquet flooring. A 37 screed can be installed as bonded or unbonded.

FEATURES

• Early drying compared to traditional cement sand screed
• Reduced drying times: For bonded screed, tiles like ceramic can be laid after 24 hours using proprietary adhesive.
• After 7 days dry, it is ready to receive natural stones, textile floor coverings, parquet flooring and resin flooring.
• Walkable after 8 hours
• Easier spreading and working of the screed
• Longer smoothing and floating time
• No water curing is required but protection with PE-foil sheet recommended
• It is suitable as binder for screeds according to DIN 18560 and EN 13813



Additional Information:

  • Delivery Time: as per requirement
Get Best QuoteRequest A Callback
Ardex Endura R 24 CE Epoxy Screed

Ardex Endura R 24 CE Epoxy Screed

Product Price: Rs 3,150 / KgGet Best Price

View Brochure

Product Details:
BrandArdex Endura
Usage/Applicationprovide a flat, seamless surface to receive epoxy based coatings or toppings.
Packaging Size19 kg
Coverage Area9.6 m2 @ 1mm , 5.5 m2 @ 2 mm
Thickness2 - 4 mm
GradeIndustrial
Shelf Life12 months
Tensile Strength> 12 N/mm2 7days
Compressive Strength>84 N/mm2 7days
Flexural Strength>33 N/mm2 @ 7days
Initial Hardness24 hours
Full Cure7 days
Pot Life70 minutes
bond strength>1.5 N/mm2
voc content29.89 g/L
DESCRIPTION

R 24 CE is an economical, self-smoothing, epoxy resin floor underlay applied between 1 – 4 mm thickness. It combines outstanding mechanical properties with chemical resistance to provide a flat, seamless surface to receive epoxy based coatings or toppings.

FEATURES

• Economical underlay
• Seamless
• Self-smoothing
• Solvent free
• Excellent adhesion to cementitious substrates and subsequent finishes
• Tough & Hard wearing: durable with low maintenance cost
• Resistant to a wide range of chemicals and liquids

Get Best QuoteRequest A Callback
Ardex Endura R 70 CP Medium Duty Polyurethane Screed

Ardex Endura R 70 CP Medium Duty Polyurethane Screed

Product Price: Rs 3,765 / KgGet Best Price

View Brochure

Product DescriptionDESCRIPTION R 70 CP is a polyurethane resin flooring system having outstanding wearing properties with high chemical resistance and pleasing decorative finish. Ideally suited in aggressive areas where a seamless, joint free finish is required and maximum cleanliness is essential. Suitable for use from 2mm up to 5mm thickness. USES R 70 CP is suitable for environments that can benefit from the tough chemically resistant system. Typical areas such as

  • Food and beverage production
  • Pharmaceutical manufacturing
  • Warehouse and storage
  • Semi wet processing zones
  • Chemical plants
  • General heavy duty plant and traffic areas FEATURES
  • Hard wearing: extremely durable and abrasion resistant with low maintenance cost.
  • Facilitates rapid application: can be applied on 7 days old concrete or 2 days old polymer screeds.
  • Resistant to a wide range of chemicals and liquids.
  • Seamless: easily cleanable to maintain high standards of hygiene.
  • High Impact resistance: Classified 'High Impact Resistance' under BS 8204: Part 1: 1999.
  • Supplied in pre-measured packs for ease of mixing and consistency at site.
  • Food grade: CFTRI approved; conforms to the specifications as per U.S FDA 175.300.
  • Available in range of colours
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "Ardex Floor Coating"?
Thank youYour Enquiry has been sent successfully.

Reviews & Rating

3.3/5

★★★★★★★★★★

Reviewed by 4 Users

  • 5★2
  • 4★0
  • 3★0
  • 2★1
  • 1★1
  • User Satisfaction
  • Response100%

Most Relevant Reviews

N
★★★★★★★★★★
31-May-21
Narawade
Pune, Maharashtra
Product Name : Residential Flats
Response
N
★★★★★★★★★★
08-August-18
Nayan Karnik
Mumbai, Maharashtra
S
★★★★★★★★★★
06-April-18
Stalin
Imphal, Manipur

© Innovative Polycoats Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.